Unpacking The Detector - Agilent Technologies G1314B User Manual

3
Installing the Detector

Unpacking the Detector

Unpacking the Detector

Damaged Packaging
If the delivery packaging shows signs of external damage, please call your
Agilent Technologies sales and service office immediately. Inform your
service representative that the instrument may have been damaged during
shipment.
"Defective on arrival" problems
C A U T I O N
If there are signs of damage, please do not attempt to install the module. Inspection by
Agilent is required to evaluate if the instrument is in good condition or damaged.
➔
➔
Condensation
Condensation within the detector
C A U T I O N
Condensation will damage the system electronics.
➔
➔
32
Notify your Agilent sales and service office about the damage.
An Agilent service representative will inspect the instrument at your site and
initiate appropriate actions.
Do not store, ship or use your detector under conditions where temperature
fluctuations could cause condensation within the detector.
If your detector was shipped in cold weather, leave it in its box and allow it to warm
up slowly to room temperature to avoid condensation.
Agilent 1260 Infinity VWD User Manual