Before You Begin; Safety; Flowmeter Components - Emerson Micro Motion 2400S Installation Manual

Before you begin

1 Before you begin
This manual describes the procedures required to install the following transmitters:
• Model 2400S transmitter with analog outputs
• Model 2400S transmitter with PROFIBUS-DP
• Model 2400S transmitter with DeviceNet
1.1

Safety

Read each safety message in this document carefully before proceeding to the next step.
WARNING!
Improper installation in a hazardous area can cause an explosion. For information about
hazardous applications, refer to the appropriate Micro Motion approval documentation,
shipped with the meter or available from the Micro Motion web site.
CAUTION!
Shut off power before installing the transmitter. Excess voltage can damage the transmitter.
CAUTION!
Follow all instructions. Improper installation could cause measurement error or flowmeter
failure.
1.2

Flowmeter components

The Model 2400S transmitter is mounted on a Micro Motion sensor. The transmitter and
sensor together comprise the Micro Motion flowmeter.
Figure 1-1
Installation Manual
provides a view of the Model 2400S transmitter mounted on a sensor.
TM
5