SBC PCD1 Series Manual page 54

Saia-Burgess Controls AG
Software settings before modification:
After modification ("Set defaults" pressed):
The addresses of the RAM text strings and DBS have been changed.
The "Set Defaults" button is useful in many cases, as the addresses are automatically
set according to the hardware configuration. However, the previous settings are lost.
The new software settings are picked up at the next build.
Manual Manual PCD 1 / PCD 2 Series │ D ocument 26 / 737 EN22 │ 2 013-11-26
CPUs and expansion housings
Expansion of user memory
3
3-37