SBC PCD1 Series Manual page 268

Saia-Burgess Controls AG
Block diagram
For further information, please refer to manual 26/772, "PCD2.H32x - motion control
modules for servo-drives"
Watchdog: This module cannot be used on the base address 240 (or 496 for the
PCD2.M17x), because it would interact with the watchdog, and would cause a
malfunction.
For details, please refer to the
the watchdog in conjunction with PCD2 components.
Manual Manual PCD 1 / PCD 2 Series │ D ocument 26 / 737 EN22 │ 2 013-11-26
"Watchdog" section, which describes the correct use of
Input/output (I/O) modules
Motion control modules for servo-motors
5
5-132