SBC PCD1 Series Manual page 257

Saia-Burgess Controls AG
Block diagram
Input 0
E 0
Input 1
E 1
Input 2 E 2
Input 3
E 3
PUL
A 0
A 1
DIR
Output 2 A 2
A 3
Output 3
For further information, please refer to manual 26/760, "PCD2.H210 - motion control
modules for stepper motors"
Watchdog: This module cannot be used on the base address 240 (or 496 for the
PCD2.M17x), because it would interact with the watchdog, and would cause a
malfunction.
For details, please refer to the
the watchdog in conjunction with PCD2 components.
Manual Manual PCD 1 / PCD 2 Series │ D ocument 26 / 737 EN22 │ 2 013-11-26
User PROM Oscillator
FPGA
(Field Programmable
Gate Array)
Input filter and adaptation from 24V to 5V
Output amplifier 5 .to. 32 V
"Watchdog" section, which describes the correct use of
Input/output (I/O) modules
Motion control modules for stepper motors
(Uext)
DC
5
5-121