SBC PCD1 Series Manual page 159

Saia-Burgess Controls AG
Output circuits and terminal designation
LED
address A5
Output conducting (set):
Output disconnected (reset):
Fuse: It is recommended that each module should be separately protected with a
fast-blow (S) fuse of max. 12.5 A.
Watchdog: This module can be used on all base addresses; there is no interaction with the
watchdog on the CPUs. For details, please refer to the
the correct use of the watchdog in conjunction with PCD2 components.
Manual Manual PCD 1 / PCD 2 Series │ D ocument 26 / 737 EN22 │ 2 013-11-26
9 8 7 6
A5
Fuse
24 VDC
LED on
LED off
Input/output (I/O) modules
Output
transistors
(MOSFET)
Protective
diodes
5 0
Terminals
A0
Loads
"Watchdog" section, which describes
Digital output modules
5-23
5