Saia-Burgess Controls AG
Programming
Classic:
xx7 and RIOs: the firmware reads in the values according to the configuration
Watchdog: This module can be used on all base addresses; there is no interaction
with the watchdog on the CPUs. For details, please refer to the
section, which describes the correct use of the watchdog in conjunction with PCD2
components.
Manual Manual PCD 1 / PCD 2 Series │ D ocument 26 / 737 EN22 │ 2 013-11-26
For programming the modules, an FBox is available.
(I/O Builder or network configurator)
Analogue input modules with electricaly isolation
"Watchdog"
Input/output (I/O) modules
5
5-75