SBC PCD1 Series Manual page 20

Saia-Burgess Controls AG
Noise emission
PCD2.M150/M480
Noise immunity PCD1/
PCD2
Mechanism and mounting
Housing material
Mounting rail
Connections
Screw terminals
Plug-in screw terminals
Standards / approvals
EN/IEC
Shipbuilding
cULus-listed
Manual Manual PCD 1 / PCD 2 Series │ D ocument 26 / 737 EN22 │ 2 013-11-26
according to EN50081-2: Class A (for industrial areas)
Guidance on the correct use of these controls in residential
areas can be found at www.sbc-support.com
measures).
according to EN50082-2
Base:
Cover:
Fibre optics: PC, crystal-clear
Double top-hat rail as per EN50022-35 (2 x 35 mm)
Unless specified otherwise: for wires of 1.5 mm
2 x 0.5 mm (2 x AWG 20)
2
The terminal block may only be plugged onto 20 times. It must
then be replaced, to guarantee a reliable contact
EN/IEC61131-2 "Programmable controllers"
ABS, BV, DNV, GL, LRS, PRS.
Please verify if your chosen product is mentioned in the
list of corresponding Type-Approval-Company under
www.sbc-support.com.
Please verify if your chosen product is listed in the correspond-
ing Certificate under www.sbc-support.com. The condition for
cULus Compliance are mentioned on the sheet annexed to the
product or can be required under www.sbc-support.com.
CPUs and expansion housings
General technical details
(additional
(AWG 16) or
2
3
3-3