SBC PCD1 Series Manual page 38

Saia-Burgess Controls AG
The connection to the base unit is via the 26-core extension cable
● PCD2.K100 for mounting beneath each other, or
● PCD2.K110
● PCD2.K120 for specific applications (length 2 m)
The PCD2.Mxx0 base units have 8 sockets for input/output modules. The sockets are
numbered clockwise from the top left, from 0 to 7.
The controllers can also be expanded with PCD2.C150 (4-socket) and PCD2.C100
(8-socket) expansion housings to provide up to 15 sockets.
0 1
7 6
8 9
15 14
Manual Manual PCD 1 / PCD 2 Series │ D ocument 26 / 737 EN22 │ 2 013-11-26
for mounting side-by-side
Base unit PCD2.Mxx0
Sockets numbered clockwise from 0 to 7.
2 3
All modules of types E, A, W and H can run in any
socket.
The PCD2.T8xx modems cannot be used in all
sockets; please refer to the manual
modules
5 4
PCD2.K100 or K110 bus extension cable
10 11
PCD2.C100 expansion housing
Sockets numbered clockwise from 8 to 15.
Socket 15 (shaded) cannot be used for modules of
types W or H.
12
13
8 9
PCD2.C150 expansion housing
Sockets numbered clockwise from 8 to 11
10
11
CPUs and expansion housings
Expansion housings and bus cables
26/771 for these
3
3-21