Configuring the SCMP
From the SCE(config)# prompt, type:
Command
scmp reconnect-interval interval
Defining the Loss-of-Sync Timeout Parameter
The loss of sync timeout interval is the amount of time between loss of connection between the Cisco
SCE platform and an SCMP peer device and the loss-of-sync event. (To prevent miss-classification,
loss-of-sync event removes all subscribers that were provisioned by the relevant SCMP peer device.)
Options
The following options are available:
•
From the SCE(config)# prompt, type:
Command
scmp loss-of-sync-timeout interval
Adding an SCMP Peer Device
•
•
Adding an SCMP peer device is a two-step process:
1.
2.
How to Define an SCMP Peer Device
Options
The following options are available:
•
•
•
Cisco SCE 8000 10GBE Software Configuration Guide
13-12
interval—Loss of sync timeout interval in seconds
Default = 90 seconds
–
How to Define an SCMP Peer Device, page 13-12
How to Assign the SCMP Peer Device to an Anonymous Group, page 13-13
Define the device, configuring the following parameters:
–
device name
RADIUS host
–
RADIUS shared secret authorization
–
port number (optional)
–
accounting port number (optional)
–
Associate the device with one or more unmapped anonymous groups.
peer_device_name—User-assigned name of the SCMP peer device
radius_hostname—IP address or host-name of the RADIUS host (if a host-name is used, it must be
valid at time of the configuration)
shared_secret—RADIUS shared secret
Chapter 13
Purpose
Defines the reconnect interval parameter.
Purpose
Defines the loss-of-sync timeout parameter.
Managing the SCMP
OL-30621-02