Introduction - Cisco SCE 8000 10GBE Software Configuration Manual

Command-Line Interface
Revised: February 07, 2014, OL-30621-02

Introduction

This chapter describes how to use the Cisco SCE platform Command-Line Interface (CLI), its
hierarchical structure, authorization levels and its help features. The Command-Line Interface is one of
the Cisco SCE platform management interfaces.
The CLI is accessed through a Telnet session or directly via the console port on the front panel of the
Cisco SCE platform. When you enter a Telnet session, you enter as the simplest level of user, in the User
Exec mode.
The Cisco SCE platform supports up to eleven concurrent CLI sessions; five sessions initiated by Telnet
connection, five sessions via SSH connection, and one session on the console port.
•
•
•
•
•
OL-30621-02
Authorization and Command Mode Levels (Hierarchy), page 2-2
CLI Help Features, page 2-9
Navigational and Shortcut Features, page 2-11
Managing Command Output, page 2-14
Creating a CLI Script, page 2-16
C H A P T E R
Cisco SCE 8000 10GBE Software Configuration Guide
2
2-1