Options - Cisco SCE 8000 10GBE Software Configuration Manual

Configuring Time Clocks and Time Zone

Options

The following option is available:
•
From the SCE# prompt, type calendar set time-date and press Enter.
Step 1
Sets the system calendar to the specified time and date.
The time specified in this command is relative to the configured time zone.
From the SCE# prompt, type clock read-calendar and press Enter.
Step 2
Synchronizes the system clock with the calendar time you just set .
Setting the Calendar: Example
The following example shows that the calendar is set to 10:20 AM, May 13, 2007. The clock is then
synchronized with the calendar setting.
SCE#calendar set 10:20:00 13 may 20017
SCE#clock read-calendar
SCE#show calendar
10:21:06
Setting the Time Zone
Options
The following options are available:
•
•
•
From the SCE(config)# prompt, type:
Command
clock timezone zone hours minutes
Cisco SCE 8000 10GBE Software Configuration Guide
6-8
time-date —the time and date you want to set, in the following format:
hh:mm:ss day month year
UTC THU May 13
zone—The name of the time zone to be displayed.
default = GMT
hours—The hours offset from UTC. This must be an integer in the range –23 to 23.
default = 0
minutes—The minutes offset from UTC. This must be an integer in the range of 0 to 59. Use this
parameter to specify an additional offset in minutes when the offset is not measured in whole hours.
default = 0
2007
Purpose
Sets the timezone to the specified timezone name
with the configured offset in hours and minutes.
Chapter 6 Global Configuration
OL-30621-02