Terminal Session-Timeout; Terminal Session-Welcome - Cisco CSACS-1121-K9 Reference Manual

EXEC Commands

terminal session-timeout

To set the inactivity timeout for all sessions, use the terminal session-timeout command in the EXEC
mode.
Syntax Description minutes
Defaults 30 minutes
Command Modes EXEC
Usage Guidelines
Setting the terminal session-timeout command to zero (0) results in no timeout being set.
Examples
acs/admin# terminal session-timeout 40
acs/admin#
Related Commands Command

terminal session-welcome

terminal session-welcome
To set a welcome message on the system for all users who log in to the system, use the terminal
session-welcome command in EXEC mode.
Syntax Description string
Defaults No default behavior or values.
Command Modes
EXEC
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-54
terminal session-timeout minutes
Sets the number of minutes for the inactivity timeout. From 0 to 525,600.
Zero (0) disables the timeout.
terminal session-welcome string
Welcome message. Up to 2,048 alphanumeric characters.
Description
Sets a welcome message on the system for all users who log in to the
system.
Appendix A ACS Command Reference
OL-18996-01