How To Configure The Syslog Facility; How To Restore The Default Syslog Facility; Configuring The Syslog Logging Rate Limit - Cisco SCE 8000 10GBE Software Configuration Manual

Chapter 4 Utilities
Table 4-2
Facility-type keyword
mail
news
sys9
sys10
sys11
sys12
sys13
sys14
syslog
user
uucp

How to Configure the Syslog Facility

From the SCE# prompt, type configure and press Enter.
Step 1
From the SCE (config)# prompt, type logging facility facility-type and press Enter.
Step 2

How to Restore the Default Syslog Facility

From the SCE# prompt, type configure and press Enter.
Step 1
From the SCE (config)# prompt, type no logging facility and press Enter.
Step 2

Configuring the Syslog Logging Rate Limit

You can configure a maximum number of messages logged per second. In addition, you can specify a
severity level above which the rate is unlimited. For example, you can configure a rate limit for all
messages below the fatal severity level.
OL-30621-02
logging facility types (continued)
Description
Mail system
USENET news
System use
System use
System use
System use
System use
System use
System log
User process
UNIX-to-UNIX copy system
Cisco SCE 8000 10GBE Software Configuration Guide
Managing Syslog
4-13