Cisco SCE 8000 10GBE Software Configuration Manual page 300

Monitoring Subscribers
How to display subscribers that match a specified prefix
Options
The following options are available:
prefix—Subscriber prefix to match
•
From the SCE> prompt, type:
Command
show interface linecard 0 subscriber prefix
prefix
How to display subscribers that match a specified suffix
Options
The following options are available:
suffix—Subscriber suffix to match
•
From the SCE> prompt, type:
Command
show interface linecard 0 subscriber suffix
suffix
How to display the number of subscribers that match a specified value of a subscriber property
Options
The following options are available:
• propertyname—Name of the subscriber property to match
• property-val—Value of that subscriber property to match
From the SCE> prompt, type:
Command
how interface linecard 0 subscriber amount
s
property propertyname equals property-val
How to display the number of subscribers that are greater than or less than a specified value of a subscriber
property
Options
The following options are available:
propertyname—Name of the subscriber property to match
•
property-val—Value of that subscriber property to match
•
Cisco SCE 8000 10GBE Software Configuration Guide
10-24
Chapter 10
Purpose
Displays subscribers that match a specified prefix.
Purpose
Displays subscribers that match a specified suffix.
Purpose
Displays the number of subscribers that match a
specified value of a subscriber property.
Managing Subscribers
OL-30621-02