How To View All Traffic Counters - Cisco SCE 8000 10GBE Software Configuration Manual

Chapter 7 Configuring Line Interfaces
Viewing a Traffic Counter: Example
The following example displays information for the traffic counter "cnt".
SCE# show interface linecard 0 traffic-counter name cnt
Counter 'cnt' value: 0 packets. Rules using it: None.

How to View All Traffic Counters

From the SCE# prompt, enter:
Command
show interface linecard 0 traffic-counter all
Viewing the Traffic Counters: Example
The following example displays information for all existing traffic counters.
SCE# show interface linecard 0 traffic-counter all
Counter 'cnt' value: 0 packets. Rules using it: None.
Counter 'cnt2' value: 0 packets. Rules using it: Rule2.
2 counters listed out of 32 available.
How to Reset a Specified Traffic Counter
From the SCE# prompt, enter:
Command
clear interface linecard 0 traffic-counter name
counter-name
How to Reset All Traffic Counters
From the SCE# prompt, enter:
Command
clear interface linecard 0 traffic-counter all
OL-30621-02
Configuring Traffic Rules and Counters
Purpose
Displays the value of the each counter and lists the
traffic rules that use it.
Purpose
Resets the specified traffic counter.
Purpose
Resets all traffic counters.
Cisco SCE 8000 10GBE Software Configuration Guide
7-35