Cisco SCE 8000 10GBE Software Configuration Manual page 266

Configuring Data Destinations and Categories
The forwarding mode is defined for the entire RDR formatter, not just one category. Since the category
"prepaid" goes to only one destination, the forwarding mode is irrelevant. It is relevant, however to the
"billing" category, since it goes to two different destinations.
SCE(config)# rdr-formatter forwarding-mode multicast
SCE(config)# rdr-formatter category number 1 name billing
SCE(config)# rdr-formatter category number 2 name prepaid
SCE(config)# rdr-formatter destination 10.1.1.205 port 33000 priority 40 protocol
NetFlowV9 transport udp
SCE(config)# no rdr-formatter destination 10.1.1.205 port 33000 category name prepaid
protocol NetFlowV9 transport udp
SCE(config)# rdr-formatter destination 10.10.10.96 port 33000 category name billing
priority 90 protocol NetFlowV9 transport udp
SCE(config)# rdr-formatter destination 10.1.96.0 port 33000 category name prepaid priority
80prepaid priority 80 protocol NetFlowV9 transport udp
Example 5
Finally, the following example illustrates a configuration with three categories and three destinations, as
follows
Category 1: 'Billing", RDRv1 protocol, goes to Destination 1
•
• Category 2: "Prepaid", RDRv1 protocol, goes to Destinations 1 and 2
• Category 3: "Special Prepaid", NetFlow V9 protocol, goes to Destination 3, RDRv1 protocol goes
to Destination 2
Figure 9-6
RDR Formatter
SCE(config)# rdr-formatter forwarding-mode multicast
SCE(config)# rdr-formatter category number 1 name billing
SCE(config)# rdr-formatter category number 2 name prepaid
SCE(config)# rdr-formatter category number 3 name special-prepaid
SCE(config)# rdr-formatter destination 10.1.1.205 port 33000 category name billing
priority 90 category name prepaid priority 80 protocol RdrV1 transport tcp
SCE(config)# rdr-formatter destination 10.10.10.96 port 33000 category name prepaid
priority 90 category name special-prepaid priority 80 protocol RdrV1 transport tcp
SCE(config)# rdr-formatter destination 10.1.1.206 port 33000 category name special-prepaid
priority 90 protocol NetFlowV9 transport udp
Cisco SCE 8000 10GBE Software Configuration Guide
9-12
(Figure 9-6):
Configuring Destinations: Three Categories and Two Protocols
SCE platform
"Billing"
"Prepaid"
"Special Prepaid" Netflow
"Special Prepaid" RDRv1
Chapter 9 Raw Data Formatting: The RDR Formatter and NetFlow Exporting
Destination 1
Destination 2
Destination 3
OL-30621-02