Table of Contents
Advertisement
How to Display the Cisco SCE Platform Version Information
How to Display the Cisco SCE Platform Version Information
Use this command to display global static information on the Cisco SCE platform, such as software and
hardware version, image build time, system uptime, last open packages names and information on the
SLI application assigned.
From the SCE> prompt, type:
Command
show version
Example for Displaying the Cisco SCE Platform Version Information
The following example shows how to display the Cisco SCE platform version information:
SCE> show version
System version: Version 3.1.6S Build 279
Build time: Jun 10 2008, 19:27:47 (Change-list 335658)
Software version is: Version 3.1.6S Build 279
Hardware information is:
----------------
Firmware
----------------
kernel : [kernel] 1.0.0/5 (inactive: [kernel] 1.0.0/5)
u-boot : [uboot] 1.0.0/6 (field: [uboot] 0.8.1/13)
select : [ubs-cf1] 1.0.0/5 (secondary: [ubs-cf1] 1.0.0/5)
----------------
Slot 1: SCM-8000
----------------
serial-num : CAT1202G07D
part-num : 73-10598-01 38
cpld : 0x8162
vtpld : 0xc001
summit-0 : 0x10008
summit-1 : 0x10008
dpt/tx : 0x4837
cls/ff : 0x2047
cls flow cap: 33554432
----------------
TVR
----------------
#cpus : 1
cpu SVR: 0x80900120
cpu PVR : 0x80040202
cpu freq : 1000MHz
cpu (eeprom): 2.1, 1000MHz
cpld : 0xa1b7
cpld-ufm : 0xa803
summit : 0x10007
cf : Model=SMART CF, FwRev=0x20060811, Size=4062240KB
----------------
CFC-0
----------------
board type : P2
#cpus : 3
Cisco SCE 8000 10GBE Software Configuration Guide
3-10
Chapter 3
Basic Cisco SCE 8000 Platform Operations
Purpose
Displays the Cisco SCE platform version
information.
OL-30621-02
Advertisement
Chapters
Table of Contents
