How To Assign The Scmp Peer Device To An Anonymous Group - Cisco SCE 8000 10GBE Software Configuration Manual

Chapter 13 Managing the SCMP
•
•
Defaults:
•
•
From the SCE(config)# prompt, type:
Command
scmp name peer_device_name radius
radius_hostname secret shared_secret
[auth-port auth-portnumber acct-port
acct-portnumber]

How to Assign the SCMP Peer Device to an Anonymous Group

This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
Options
The following options are available:
•
•
•
•
From the SCE(config if)# prompt, type:
Command
subscriber anonymous-group name
group-name IP-range range [template template]
scmp name peer-device-name
How to Remove an Anonymous Group from the SCMP Peer Device
This command removes the specified anonymous group from the SCMP peer device.
From the SCE(config if)# prompt, type:
Command
no subscriber anonymous-group name
group-name
OL-30621-02
auth-portnumber (optional)—Authorization port number
acct-portnumber (optional)—Accounting port number
auth-port#—1812
acct-port#—1813
group-name—Name of the anonymous subscriber group to be associated with the specified SCMP
peer device.
range (optional)—IP range defined for the anonymous group
template (optional)—Group template assigned to the anonymous group
peer-device-name—User-assigned name of the SCMP peer device
Purpose
Defines an SCMP peer device.
Purpose
Assigns the SCMP peer device to an anonymous
group.
Purpose
Removes an anonymous group from the SCMP
peer device.
Cisco SCE 8000 10GBE Software Configuration Guide
Configuring the SCMP
13-13