Cisco SCE 8000 10GBE Software Configuration Manual page 420

Configuring VAS Traffic Forwarding
Options
The following options are available:
•
•
•
How to Configure the Minimum Number of Active Servers for a Specified VAS Server Group
From the SCE(config if)# prompt, type:
Command
VAS-traffic-forwarding VAS server-group
group-number failure minimum-active-servers
min-number
How to Reset the Minimum Number of Active Servers for a Specified VAS Server Group to the Default
From the SCE(config if)# prompt, type:
Command
default VAS-traffic-forwarding VAS
server-group group-number failure
minimum-active-servers min-number
How to Configure the Failure Action for a Specified VAS Server Group
From the SCE(config if)# prompt, type:
Command
VAS-traffic-forwarding VAS server-group
group-number failure action {block | pass}
How to Configure the Failure Action for a Specified VAS Server Group to the Default
From the SCE(config if)# prompt, type:
Command
default VAS-traffic-forwarding VAS
server-group group-number failure action
Cisco SCE 8000 10GBE Software Configuration Guide
14-30
group-number—The ID number of the VAS server group
minimum-active-servers min-number—The minimum number of active servers required for the
specified server group
Default—1
–
failure action—Which of the following actions will be applied to all new flows for the specified
server group:
– block
pass (default)
–
Chapter 14 Value-Added Services (VAS) Traffic Forwarding
Purpose
Configures the minimum number of active servers
for a specified VAS server group.
Purpose
Resets the minimum number of active servers for
a specified VAS server group to the default.
Purpose
Configures the failure action for a specified VAS
server group.
Purpose
Configures the failure action for a specified VAS
server group to the default.
OL-30621-02