Table of Contents
Advertisement
Chapter 11
Redundancy and Failover
Viewing the Current Link to Port Mappings: Example
The following example shows the link-to-port mapping.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 link-to-port-mappings
Link Id | Upstream Port <Out>| Downstream Port <Out>
-----------------------------------------------------------
0
SCE>
How to View the Current Link Mode
From the SCE# prompt, type:
Command
show interface linecard 0 link mode
OL-30621-02
| 0/2
| 0/1
CLI Commands for Cascaded Systems
Purpose
Displays the current link mode.
Cisco SCE 8000 10GBE Software Configuration Guide
11-17
Advertisement
Chapters
Table of Contents
