Introduction - Cisco SCE 8000 10GBE Software Configuration Manual

Managing Subscribers
Revised: February 07, 2014, OL-30621-02

Introduction

The Cisco SCE platform is subscriber aware, that is, it can relate traffic and usage to specific customers.
This ability to map between IP flows and a specific subscriber allows the system to do the following:
•
•
•
•
•
•
•
•
•
•
•
Subscriber-aware features are not available for IPv6 traffic. IPv6 traffic is handled in the subscriber-less
Note
mode. All traffic is classified to the default subscriber, with a default package.
OL-30621-02
Maintain the state of each subscriber transmitting traffic through the platform
Provide usage information for specific subscribers
Enforce the appropriate policy on subscriber traffic (each subscriber can have a different policy)
Information About Subscribers, page 10-2
Importing and Exporting Subscriber Information, page 10-10
Removing Subscribers and Templates, page 10-13
Importing and Exporting Anonymous Groups, page 10-19
Monitoring Subscribers, page 10-20
Configuring Subscriber Aging, page 10-34
Managing VPNs and VPN Subscriber Mappings, page 10-37
Configuring the Cisco SCE Platform/SM Connection, page 10-39
C H A P T E R
Cisco SCE 8000 10GBE Software Configuration Guide
10
10-1