Release 3.6.5 Mib Updates - Cisco SCE 8000 10GBE Software Configuration Manual

Appendix A Cisco Service Control MIBs

Release 3.6.5 MIB Updates

Temperature Sensor Traps Updated
In SCOS Release 3.6.5, the following changes were made in the traps related to the
CISCO-ENTITY-SENSOR MIB, entSensorThresholdNotification (OID 1.3.6.1.4.1.9.9.91.2.0.1):
•
•
•
CISCO-ENTITY-SENSOR MIB is read-only. Thresholds are internally defined and cannot be changed.
Note
Temperature reported for the entities (FRUs) are a normalized temperature since there is no single
Note
temperature reading for an entire FRU.
Release 3.7.0 MIB Updates
SNMP Support for Aggregative Global Controllers
In Release 3.7.0, the CISCO-SERVICE-CONTROLLER-MIB has been expanded to provide information
regarding the Aggregative Global Controllers. The following tables have been added to the
CISCO-SERVICE-CONTROLLER-MIB:
•
•
You can display the contents of the Aggregative Global Controllers MIB using the following command:
show interface LineCard 0 aggregative-global-controllers side (subscriber | network) agc agc-id
For a complete description of the CISCO-SERVICE-CONTROLLER-MIB, see
Note
CISCO-SERVICE-CONTROLLER-MIB.
linkUp and linkDown Notification Traps
In SCOS Release 3.7.0, the ifDescr varbind has been added to the linkUp and linkDown traps, which
provide the description of the link that is either in the down state or some other state (as indicated by
ifOperStatus).
OL-30621-02
Traps will be sent for the entity corresponding to the FRU that actually violated the threshold.
Previously all temperature sensor traps were from the FAN entity.
Only one trap will be sent that indicates both the current value as well as the threshold value of the
component within the FRU that is responsible for the threshold violation or conformance.
Previously there were two traps (on and off), and there was no indication of the actual current value
or the threshold.
The trap will also identify the component within the FRU that is associated with the threshold
violation or conformance.
cscAggregativeGlobalControllersTable
cscAggregativeGlobalControllersLinkTable
Cisco SCE 8000 10GBE Software Configuration Guide
MIB Updates
A-29