Monitoring Tacacs+ - Cisco SCE 8000 10GBE Software Configuration Manual

TACACS+ Authentication, Authorization, and Accounting
How to Enable AAA Accounting
From the SCE(config)# prompt, type:
Command
aaa authentication accounting commands level
default stop-start group tacacs+
How to Disable AAA Accounting
From the SCE(config)# prompt, type:
Command
aaa authentication accounting commands level
default

Monitoring TACACS+

•
•
•
Displaying Statistics for TACACS+ Servers
From the SCE# prompt, type:
Command
show tacacs
Displaying Statistics, Keys, and Timeouts for TACACS+ Servers
From the SCE# prompt, type:
Command
show tacacs all
Cisco SCE 8000 10GBE Software Configuration Guide
5-30
Displaying Statistics for TACACS+ Servers, page 5-30
Displaying Statistics, Keys, and Timeouts for TACACS+ Servers, page 5-30
Monitoring TACACS+ Users, page 5-31
Chapter 5 Configuring the Management Interface and Security
Purpose
Enables AAA accounting.
The start-stop keyword (required) indicates that
the accounting message is sent at the beginning
and the end (if the command was successfully
executed) of the execution of a CLI command.
Purpose
Disables AAA accounting.
Purpose
Displays statistics for TACACS+ servers.
Purpose
Displays statistics, keys, and timeouts for
TACACS+ servers.
Note that, although most show commands are
accessible to viewer level users, the ' all ' option is
available only at the admin level. Use the
command ' enable 10 ' to access the admin level.
OL-30621-02