How To Configure The Minimum Severity Level For Syslog Messages; How To Restore The Default Minimum Severity Level For Syslog Messages; Configuring The Syslog Facility - Cisco SCE 8000 10GBE Software Configuration Manual

Managing Syslog
Options
The following option is available:
•

How to Configure the Minimum Severity Level for Syslog Messages

Step 1 From the SCE# prompt, type configure and press Enter.
Step 2 From the SCE (config)# prompt, type logging trap severity-level and press Enter.

How to Restore the Default Minimum Severity Level for Syslog Messages

Step 1 From the SCE# prompt, type configure and press Enter.
Step 2 From the SCE (config)# prompt, type no logging trap and press Enter.

Configuring the Syslog Facility

You can assign Syslog messages to a specified facility.
Options
The following option is available:
•
Table 4-2
Facility-type keyword
auth
cron
daemon
kern
local0-local7
lpr
Cisco SCE 8000 10GBE Software Configuration Guide
4-12
severity-level—The name of the desired severity level at which messages should be logged.
Messages at or lower than the specified level are logged. Severity levels supported on the Cisco SCE
platform are as follows:
fatal
–
– error
– warning
– info
Default = info
facility-type—Syslog facility. See
default = local7
–
logging facility types
Table 4-2
Description
Authorization system
Cron facility
System daemon
Kernel
Reserved for locally defined messages
Line printer system
Chapter 4 Utilities
OL-30621-02