Monitoring Vas Traffic Forwarding - Cisco SCE 8000 10GBE Software Configuration Manual

Monitoring VAS Traffic Forwarding

Monitoring VAS Traffic Forwarding
Use the commands in this section to display the following information for VAS configuration and
operational status summary.
•
•
This information may be displayed for a specific server group or all server groups
•
This information may be displayed for a specific server or all servers
•
The following sample outputs are included.
•
•
•
•
•
•
•
•
•
How to Display Global VAS Status and Configuration
From the SCE> prompt, type:
Command
show interface linecard 0
VAS-traffic-forwarding
Example
SCE>show interface linecard 0 VAS-traffic-forwarding
VAS traffic forwarding is enabled
VAS traffic link configured: Link-1
Cisco SCE 8000 10GBE Software Configuration Guide
14-32
Global VAS status summary—VAS mode, the traffic link used
VAS Server Groups information summary—operational status, number of configured servers,
number of current active servers.
VAS servers information summary—operational status, Health Check operational status, number of
subscribers attached to this server.
VAS health check counters
How to Display Global VAS Status and Configuration, page 14-32
How to Display Operational and Configuration Information for a Specific VAS Server Group,
page 14-33
How to Display Operational and Configuration Information for All VAS Server Groups, page 14-33
How to Display Operational and Configuration Information for a Specific VAS Server, page 14-33
How to Display Operational and Configuration Information for All VAS Servers, page 14-34
How to Display the VAS Servers Used by a Specified Subscriber, page 14-34
How to Display Health Check Counters for All VAS Servers, page 14-35
How to Clear the Health Check Counters for a Specified VAS Server, page 14-35
How to Clear the Health Check Counters for All VAS Servers, page 14-35
Chapter 14 Value-Added Services (VAS) Traffic Forwarding
Purpose
Displays the global VAS status and configuration.
actual: Link-1
OL-30621-02