Table of Contents
Advertisement
Chapter 6
Global Configuration
Options
The following options are available in the IP advertising commands:
•
•
How to Enable IP Advertising
From the SCE(config)# prompt, type:
Command
ip advertising
How to Configure the IP Advertising Destination
From the SCE(config)# prompt, type:
Command
ip advertising destination destination
How to Configure the IP Advertising Interval
From the SCE(config)# prompt, type:
Command
ip advertising interval interval
Configuring IP Advertising: Example
The following example shows how to configure IP advertising, specifying 10.1.1.1 as the destination and
an interval of 240 seconds.
SCE(config)#ip advertising destination 10.1.1.1
SCE(config)#ip advertising interval 240
How to Display the Current IP Advertising Configuration
From the SCE# prompt, type:
Command
show ip advertising
OL-30621-02
interval—The time interval between pings in seconds.
default interval = 300 seconds
destination—The IP address of the destination for the ping requests
default destination = 127.0.0.1
Purpose
Enables IP advertising.
Purpose
Configures the destination for the IP advertising
pings.
Purpose
Configures the frequency of the IP advertising
pings.
Purpose
Displays the status of IP advertising (enabled or
disabled), the configured destination, and the
configured interval.
Cisco SCE 8000 10GBE Software Configuration Guide
IP Routing Configuration
6-5
Advertisement
Chapters
Table of Contents
