Danfoss VLT AutomationDrive FC 300 Series Programming Manual page 189

Parameter Lists
4.1.21 30-** Special Features
Par. Parameter description
No. #
30-0* Wobbler
30-00 Wobble Mode
30-01 Wobble Delta Frequency [Hz]
4 4
30-02 Wobble Delta Frequency [%]
30-03 Wobble Delta Freq. Scaling Resource
30-04 Wobble Jump Frequency [Hz]
30-05 Wobble Jump Frequency [%]
30-06 Wobble Jump Time
30-07 Wobble Sequence Time
30-08 Wobble Up/ Down Time
30-09 Wobble Random Function
30-10 Wobble Ratio
30-11 Wobble Random Ratio Max.
30-12 Wobble Random Ratio Min.
30-19 Wobble Delta Freq. Scaled
30-2* Adv. Start Adjust
30-20 High Starting Torque Time [s]
30-21 High Starting Torque Current [%]
30-22 Locked Rotor Protection
30-23 Locked Rotor Detection Time [s]
30-8* Compatibility (I)
30-80 d-axis Inductance (Ld)
30-81 Brake Resistor (ohm)
30-83 Speed PID Proportional Gain
30-84 Process PID Proportional Gain
Table 4.25
188
®
VLT AutomationDrive Programmming Guide
Default value
[0] Abs. Freq., Abs. Time
5.0 Hz
25%
[0] No function
0.0 Hz
0%
App.Dependent
10.0 s
5.0 s
[0] Off
1.0 N/A
10.0 N/A
0.1 N/A
0.0 Hz
0.00 s
100.0%
[0] Off
0.10 s
App.Dependent
App.Dependent
App.Dependent
0.100 N/A
®
MG33ME02 - VLT is a registered Danfoss trademark
4-set-up Change Conver-
during sion index
operation
All set-ups FALSE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups FALSE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups FALSE
1 set-up TRUE
All set-ups TRUE
All set-ups TRUE
Type
- Uint8
-1 Uint8
0 Uint8
- Uint8
-1 Uint8
0 Uint8
-3 Uint16
-1 Uint16
-1 Uint16
- Uint8
-1 Uint8
-1 Uint8
-1 Uint8
-1 Uint16
-2 Uint8
-1 Uint32
- Uint8
-2 Uint8
-6 Int32
-2 Uint32
-4 Uint32
-3 Uint16