Table of Contents
Advertisement
Programming
Remarks:
- You can erase a number within the programming process by pressing the redial key.
- You can enter dialling pauses by pressing the lower speed dialling key.
Store restricted numbers
You can assign restricted numbers to 5 memory locations (1 - 5). The length of a restricted
number is limited to 20 digits as a maximum.
#
Remarks:
- You can erase a number within the programming process by pressing the redial key.
- You can enter dialling pauses by pressing the lower speed dialling key.
Direct call/full restriction/dialling restriction ON/OFF
The direct call numbers or the restricted numbers should only be activated if you had
stored a direct call number or restricted numbers before (see last paragraphs).
Enter code 400.
Enter direct call number.
Press the P key. The direct call number is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Select and enter the code of the desired memory location:
code 421 for memory location 1
code 422 for memory location 2
code 423 for memory location 3. If desired, continue until
code 425 for memory location 5.
Enter the restricted number.
Press the P key. The restricted number is stored.
35
Advertisement
Table of Contents
