Table of Contents
Advertisement
Programming
Programm number of rings
The telephone in the room to be monitored rings once in the basic setting and after the
access code has been entered switches into hearing mode at the other telephone. For
special applications it can be usefull to allow the telephone in the room to ring several
times (for example, this allows a normal call to be accepted, although the telephone is in
room monitoring mode). You can set the number of calls (1-9) using the following program-
mation. One ring is set when the system is delivered.
#
Vital sign function
The vital sign function is used to control the presence and health of a person. If the func-
tion is set, the person has to press the speed dialling key 3, if the phone is asked to do so.
If the person does not press the key, an emergency call will be triggered after 30 minutes
automatically. Precondition for this is that the emergency function is activated. The safety
timer starts over again when the speed dialling key 3 is pressed.
Set safety timer for the vital sign function
The timer can be set hourly. You can enter between 1-99 hours. If a "0" is entered, the
timer do not start.
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 661.
Enter 1 - 9 rings using the number keys.
Press the P key. The setting is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 683.
Enter hours using numeric keys.
If a "0" is entered, the timer do not start.
Press the P key. The setting is stored.
42
Advertisement
Table of Contents
