Table of Contents
Advertisement
Extended telephone functions
Play-back recording after the call:
Do-not-disturb function
The ringing signal can be deactivated. In this case, the telephone will not
ring if there is an incoming call. But, an incoming call is indicated in the tel-
ephone display. See page 22 of the programming instructions.
List of released numbers for ringing signals
You can store up to 10 telephone numbers in the list of released numbers
for ringing signals. Then, your telephone will only ring if there is an incom-
ing call from one of the stored numbers. All other incoming calls will only
be indicated optically in the display. The list of released numbers for ringing
signals has to be activated or deactivated via programming. This function
can only be used if the caller's number is being transferred. You have either
the option to activate the list of released numbers for ringing signals or the
list of restricted numbers for ringing signals. If you set none of the two func-
tions, the ringing signal works according to the standard. See page 23 of the
pro gram ming instructions.
List of restricted numbers for ringing signals
You can store up to 10 telephone numbers in the list of restricted numbers
for ringing signals. Then, your telephone will not ring if there is an incoming
call from one of the stored numbers. All other incoming calls will be indicated
by ringing signal. If there is an incoming call from one of the numbers re-
stricted for ringing signals, this incoming call is only indicated optically in the
display. The list of restricted numbers for ringing signals has to be activated
Press speed dialling key 5. The recording is played back.
You can stop the play-back by pressing the P key.
26
Advertisement
Table of Contents
