Table of Contents
Advertisement
Programming
Emergency call identification code
When an emergency call service is called, the recipient of the emergency call can use an
identification code to get immediate information on the person seeking help. This is done
via a number sequence of multifrequency dialling tones.
#
Emergency announcement
When an emergency call is answered, the emergency announcement is played back
automatically. This announcement should be kept short (you have 20 seconds to record
the announcement). In addition, it should include all information that are required by the
recipient in order to act quickly.
Recording the emergency announcement:
#
Play-back emergency announcement:
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 353.
Enter emergency call identification code.
Press the P key. The entry is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 354
Press the triangular key and keep it pressed during the announce-
ment recording. Speak the announcement. The bar shown in the
display indicates the recording time. The maximum recording time is
20 seconds. After completion: Release the triangular key. The
announcement is recorded.
Enter code 355
30
Advertisement
Table of Contents
