Table of Contents
Advertisement
Initial operation
Illustration 5
• Use your fingers or a suitable tool to remove the caps (see illustration 5). The caps
might be reused later so keep them in a safe place.
• Place the dial pad cover (illustration 6) on the housing. Press the two plastic hooks of
the dial pad cover into the corresponding housing slots and tighten the cover. Use two
hands to push the dial pad cover towards the lower side of the housing until the two
lower hooks snap into place.
• You can remove the dial pad cover by turning round the device and pressing the two
dial pad cover hooks out of the housing slots with your thumbs. Replace the plastic
caps afterwards.
Wall mounting
The telephone can be wall-mounted using a metal holder. This holder is available option-
ally.
Prerequisites for wall-mounting:
You have connected the handset, inserted batteries and closed the battery compartment
cover. The name plates are also inserted and if desired, the dial pad cover is fixed.
Illustration 6
13
Advertisement
Table of Contents
