Table of Contents
Advertisement
Initial operation
• Insert/exchange batteries
For safety reasons, disconnect the telephone from the telephone network and the
power supply system by unplugging the telephone plug and the AC adapter. Unscrew
the battery compartment screws. Remove the cover using the two tabs. Now, insert
or exchange the batteries and consider the correct polarity when inserting them.
Close the battery compartment cover and make sure that the cover is locked again.
Screw on and tighten the screws. Reconnect the telephone to the telephone and
the power network.
• Connect handset or headset
Plug the curled handset cable plug into the jack marked with a handset symbol on the
bottom of the device and into the handset jack. Instead of the handset, you can also
connect a headset.
• Connect telephone to C/O line
Plug the small plug of the telephone connecting cable into the "LINE" jack. The large
plug is to be plugged into the telephone wall socket of your telephone connection.
• Connect telephone to "Power"
Plug the AC adapter cable plug into the "POWER" jack. Plug the AC adapter into a
power outlet to connect the device to the 230 V mains power system.
• Disconnect the cables
Unplug the AC adapter from the power outlet and unplug the telephone plug from the
telephone wall socket. At the telephone: pull the plug's locking clips towards the plug's
body to unplug and disconnect the cables.
Insert name plates
Speed dialling keys (1-5):
• Decide on how to assign the speed dialling keys (function or speed dialling):
Key 1: Speed dialling location or emergency call (SOS key)
Key 2: Speed dialling location or vital sign function (regular calls)
Key 3: Speed dialling location
Key 4: Speed dialling location
Key 5: Speed dialling location or "recording of call passages".
10
Advertisement
Table of Contents
