Table of Contents
Advertisement
Programming
Remarks:
- If you deactivate the function „two-way conversation recording via speed dialling key
5", you still have the option to record passages of a telephone conversation by the key
combination „P key and triangular key" (see user manual).
- The beginning and end of the recording is indicated by a signal tone that both parties
can hear.
- Please inform your telephone partner that you will record a passage of the conversation.
Please observe the Data Protection Law.
Program automatic redialling settings
In the factory pre-set, your telephone has the following redialling settings:
• Length of the redialling sequence: 1 minute
• Pauses between the redialling sequences: 1 minute
• Number of redialling sequences: 10
In simple words, this means that:
After activation of the automatic redialling, the called party's telephone will ring for one
minute. Afterwards, there is a pause of one minute. Then, the called party's telephone will
ring again for one minute. This process is repeated 10 times (if nobody answers the call).
Program length of the redialling sequence
#
Enter
code 640 for „recording via speed dialling key 5 OFF" or
code 641 for „recording via speed dialling key 5 ON".
Press the P key. The setting is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 650.
Enter length of the redialling sequence via the keypad
(1 - 99 seconds).
39
60 sec
P
Advertisement
Table of Contents
