Set Display Language; Activate/Deactivate Headset Operation; Recording Of Call Passages - TIPTEL Ergophone C Programming Instructions Manual

Programming

Set display language

The messages and information shown in the display can be set to different languages, i. e.
German, English, Netherlands or French.
#

Activate/deactivate headset operation

If you want to use a headset instead of a handset, you have to set the operation mode
correspondingly.
#

Recording of call passages

You can initiate the temporary two-way conversation recording by pressing speed dialling
key 5 (see user manual). You need to assign this function to speed dialling key 5 by the
following procedure. Afterwards, this key cannot be used for speed dialling anymore as it is
then exclusively reserved for temporary two-way conversation recording.
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter
code 630 for German
code 631 for English
code 632 for Netherlands or
code 633 for French.
Press the P key. The setting is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter
code 620 for „handset operation" or
code 621 for „headset operation".
Press the P key. The setting is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
or
or
38