Emergency Call Process - TIPTEL Ergophone C Programming Instructions Manual

Ergonomic telephones
Hide thumbs Also See for Ergophone C:
Table of Contents

Advertisement

Programming
b) Emergency call operation mode ON: You can send emergency calls by pressing the
SOS key (or, as for the variant with distress radio call system via a radio pendant).
Please be aware that different emergency call locations are applied, depending on whether
you use the SOS key or the radio pendant. When the emergency call is answered, the
emergency is informed via an emergency announcement that needs to be recorded earlier
(see page 30). In the emergency call operation mode, emergency calls have priority over
all other telephone activities. When there is an active emergency call, all other incoming
calls are rejected.

Emergency call process

Person seeking help
Press SOS key.
The emergency call telephone is automati-
cally switched to the hands-free mode.
End conversation:
Press loudspeaker key
DANGER
In rare cases, the function of sending out an emergency call cannot
be guaranteed. This might be the case if e.g. the telephone network
fails or if the radio transmission from the pendant to the telephone is
subject to interference. If the device is used for people who are in a criti-
cal or life-threatening health condition, you should not refrain from ad-
ditional safety means.
CAUTION
The telephone of the person receiving an emergency call has to be set
to the tone dialling method. This is a pre-requisite to establish a speech
connection to the person seeking help.
Recipient of an emergency call
Tone dialling telephone is ringing.
Pick-up the handset. The emergency
announcement is heard. Press numeric
key 5 (acknowledgement). The emergency
announcement is stopped.
Conversation with person seeking help.
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ergophone cr

Table of Contents