Table of Contents
Advertisement
Programming
Remarks:
If the connection quality is insufficient in the hands-free mode, you can also switch to a
„two-way communication":
- Press key 4: The recipient of the emergency can hear the person seeking help.
- Press key 6: The person seeking help speaks. The recipient of an emergency
- Press key 5: „hands-free mode" is activated again.
When the person seeking help hears the voice of the emergency call recipient, it is pos-
sible that the handset is picked-up from force of habit. In this case, the tele phone automati-
cally switches to handset-operation.
Storing emergency call numbers
You can store a maximum of 4 emergency call numbers. These numbers are dialled
consecutively when an emergency call is being initiated. Each emergency call number is
limited to length of 20 digits as a maximum.
Be aware: The radio emergency call function has its own memory locations.
#
Remarks:
- You can erase a number within the programming process by pressing the redial key.
- You can enter dialling pauses by pressing the lower speed dialling key.
call can switch back and forth by pressing the keys 4 and 6.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Select code of the desired memory location and enter:
code 311 for location 1
code 312 for location 2
code 313 for location 3
code 314 for location 4.
Enter emergency call telephone number.
Press the P key. The telephone number is stored.
27
Advertisement
Table of Contents
