External Telephone Numbers An Call Distribution For The S0 Ports - TIPTEL .com 410 Installation Manual

The configuration wizard
External telephone numbers an call distribution for the S0
ports
This dialogue is only available when at least one of the two S ports has been set to
0
external, i.e. for connection to the NTBA of an ISDN connection.
Here you enter the number of the first ISDN connection. You can enter up to tele-
phone numbers. The number(s) have to be entered without area code.
To each telephone number you can optionally also assign a designation. This is only
for your orientation.
On the right hand side you select the extension(s) which should ring when the indi-
vidual telephone number(s) are being called.
To each programmed telephone number you must at least enter one internal exten-
sions as target an. Each telephone number may only be entered once.
In case you also set the second S port to external, in the next step you will be asked
0
for the telephone numbers and the call distribution for the second ISDN access.
43