Ringing Melody; Indication Of Incoming Call By Flashlight On/Off; Emergency Call Operation Mode - TIPTEL Ergophone C Programming Instructions Manual

Ergonomic telephones
Hide thumbs Also See for Ergophone C:
Table of Contents

Advertisement

Programming
#

Ringing melody

Your telephone provides 10 different ringing melodies.
#

Indication of incoming call by flashlight ON/OFF

The indication of incoming flashlight is available in comfort and comfort f variants only. In
factory pre-set, flashlight indication is activated.
#

Emergency call operation mode

Your telephone allows to set two different operation modes:
a) Normal operation (emergency call operation OFF): You make your telephone calls as
usual.
Press the P key and afterwards press the # key briefly.
Enter
code 30 for „standard ringing signal operation"
code 32 for „list of restricted numbers for ringing signal ON"
Press the P key. The setting is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 220.
Change melody via the numeric key pad (key 0 - 9).
Press the P key. The setting is stored.
Press the P key and afterwards press the # key briefly.
Enter
code 40 for „indication of incoming call by flashlight ON" or
code 41 for „indication of incoming call by flashlight OFF".
Press the P key. The setting is stored.
25
or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ergophone cr

Table of Contents