Direct Dial Mode; Saving Phone Numbers - TIPTEL Ergophone 12 Operating Instructions Manual

Direct dial mode

Saving phone numbers

Your Ergophone 12 can save up to twelve phone numbers which
can be selected using the direct dial keys. A phone number can be
up to twenty digits long.
In order to supply the appliance with electricity, it is first necessary to
lift the telephone receiver.
Lift the telephone receiver, which
should be plugged into the "TEL" con-
nection of your Ergophone 12.
Press and hold the desired direct dial
key on the Ergophone 12 for six se-
conds.
Your Ergophone 12's direct dial keys
now serve as the numerical keys for
the input of the desired phone num-
ber. Enter all digits in sequence.
When you have finished inputting the
number, press the direct dial key,
which is denoted by the hash key
(#).
Now replace your telephone receiver.
In special situations (e.g. when connecting the Ergophone 12 to

telephone switchboard substations), it may be necessary to in-
sert a dialling pause after the outside line prefix (e.g. "0"). To in-
sert a dialling pause, press the dial key (denoted by the star key
*) in input mode.
Direct dial mode
You will hear the dial tone.
You will hear a beep. The Ergophone 12
is now in input mode.
The appropriate digit is denoted below
the key on the telephone.
A confirmation beep then sounds.
8