Table of Contents
Advertisement
Programming
#
Remark:
During the pause - after completion of one emergency call dialling sequence - the red LED
blinks. During an emergency call dialling sequence the LED is lit constantly.
Duration of the active connection
The „duration of the active connection" is the time in which an emergency telephone
number is dialled, the call is established and the emergency announcement is being
played back.
If nobody answers the emergency call (first number), the line is disconnected after 90
seconds (factory pre-set) and the next emergency number is called.
If the recipient answers the emergency call, e. g. after 60 seconds, the emergency an-
nouncement is heard for a maximum of 30 seconds. (The announcement is already played
back before the call is answered.)
The „duration of the active connection" always ends after the set time, apart from those
cases where the recipient acknowledges the emergency call and establishes a speech
connection to the person seeking help before, i. e. by pressing key 5 on the key pad.
The duration can be set from 1 - 99 seconds. The time period should not be too short
so that the announcement can also be heard if the emergeny call is not being answered
quickly.
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 351.
Enter duration of the pase (minutes) via the key pad (1 - 9).
Press the P key. The entry is stored.
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 352.
Enter the desired duration of an active call (seconds) via the
key pad (1 - 99).
Press the P key. The duration is stored.
90 sec
P
29
3 min
P
Advertisement
Table of Contents
