Siemens Simovert 6SE70 Series Operating Instructions Manual page 2

https://www.aotewell.com
General
These Operating Instructions are available in the following languages:
Language
Order-No.: 6SE70 . . . . 80-0AK85-1AA0 . . 87-7AK85-1AA0 . . 87-8AK85-1AA0
Converter software version:
At the time these operating instructions was printed, the infeed and regenerative feedback units were supplied
from the factory with software version
These operating instructions basically also apply to other software versions.
Older software versions:
Newer software versions: It is possible that additional parameters might exist on the infeed and regenerative
You can order the latest software version (EPROM) under MLFB No.: 6SW1701-0DA14.
The reproduction, transmission or use of this document or contents is
not permitted without express written authority. Offenders will be liable
for damages. All rights, including rights created by patent grant or
registration of a utility model or design, are reserved.
We have checked that the contents of this publication agree with the
hardware and software described herein. Nonetheless, differences
might exist and therefore we cannot guarantee that they are completely
identical. The information given in this publication is reviewed at regular
intervals and any corrections that might be necessary are made in the
subsequent printings. Suggestions for improvement are welcome at all
times.
© Siemens AG 1994 All rights reserved
AoteWell LTD
AoteWell Automation Sales Team
German French
4.7
.
It is possible that some parameters might not exist (i.e. that the function they apply to
does not exist) or that some parameters might have a restricted setting range.
However, this is generally marked in the parameter list where it applies.
feedback units (i.e. that there are also additional functions that are not described in
these operating instructions) or that some parameters might have an extended
setting range. Leave such parameters in their factory setting and on no account set
any values that are not described in these operating instructions!
Buy Siemens PLC HMI Drives at AoteWell.com
Spanish
SIMOVERT ® is a registered trademark of Siemens
https://www.aotewell.com
Sales@aotewell.com
09.02
Italian
. . 87-2AK85-1AA0