Siemens Simovert 6SE70 Series Operating Instructions Manual page 157

https://www.aotewell.com
09.02
Error code
105
106 Request not implemented in drive
107
108 Incorrect number of parameter values
The index IND contains a "0" for non-indexed parameters; a 8-bit long index value is entered (in the low-order
byte) for indexed parameters.
Exception: In the case of cyclical PROFIBUS services, the L and H byte sequence is reversed (see "Start-up of
PROFIBUS boards").
Parameter identifier
Header
PKE
Bit
15
An index value of 255 means that the request applies to all indices of the relevant parameter. In the case of a
modification request, the parameter values for all indices of the parameter must be transferred. Conversely, the
drive supplies all index values in its response to a read request.
The parameter value PWE is treated like a double word (PWE1 and PWE2). The high word is set to 0 when a
single word is transferred.
Parameter identifier
Header
PKE
Siemens AG 6SE7087-6AK85-1AA0
Rectifier/Regenerating Unit Operating Instructions
AoteWell LTD
AoteWell Automation Sales Team
Indexed parameter
Text cannot be modified
Index
IND
Index, H byte
Index
IND
PWE1
Buy Siemens PLC HMI Drives at AoteWell.com
Meaning
Applies to "Change all indices" request
Parameter value
Trailer
PWE
Index, L byte
Parameter value
Trailer
PWE
PWE2
Sales@aotewell.com
Start-Up
https://www.aotewell.com
4-75