Using This Manual - Eaton Powerware 9390 IAC-D Installation And Operation Manual

1.2 Using This Manual

This manual describes how to install and operate the Powerware 9390 IAC-D. Read and
understand the procedures described in this manual to ensure trouble-free installation and
operation.
The information in this manual is divided into the sections and chapters listed. At a
minimum, Chapters 1 through 3 and Chapter 5 should be examined.
Section I, Installation
Section II, Operation
Read through each procedure before beginning the procedure. Perform only those
procedures that apply to the IAC-D being installed or operated.
EATON Powerware 9390 IAC-D Installation and Operation Manual S 164201591 Rev B powerware.com
®
Chapter 1, "Introduction" –
the content of each chapter, text conventions used in the manual, safety warnings, and
reference information.
Chapter 2, "IAC-D Installation Plan and Unpacking" –
for the installation of the IAC-D. It discusses equipment environmental requirements,
inspecting, and unpacking cabinets.
Chapter 3, "Installing the IAC-D" –
Chapter 4, "Understanding IAC-D Operation" –
works.
Chapter 5, "IAC-D Features, Controls, and Operation" –
optional IAC-D features, the IAC-D controls, and how to use the IAC-D.
Chapter 6, "Maintaining the IAC-D" –
Chapter 7, "Product Specifications" –
Appendix A, "Installation Information" –
requirements and recommendations, and important diagrams of the cabinets'
mechanical details and electrical access.
provides the Powerware warranty for this product.
Warranty –
provides a brief description of the IAC-D, a description of
describes how to install and wire the IAC-D.
provides information on how an IAC-D
contains maintenance instructions for the IAC-D.
provides specifications for the IAC-D.
contains important information on wiring
Introduction
explains how to prepare the site
describes the standard and
1-3