Safety Warnings - Eaton Powerware 9390 IAC-D Installation And Operation Manual

1.4 Safety Warnings

EATON Powerware 9390 IAC-D Installation and Operation Manual S 164201591 Rev B powerware.com
®
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important instructions that should be followed during installation and
maintenance of the IAC-D. Please read all instructions before operating the equipment and
save this manual for future reference.
The IAC-D is designed for industrial or computer room applications, and contains safety shields
behind the doors. However, the
handled with appropriate care.
This UPS system contains LETHAL VOLTAGES. All repairs and service should be performed by
AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside
the UPS.
The UPS system contains its own energy source (batteries). The output terminals may carry
live voltage even when the UPS is disconnected from an AC source.
To reduce the risk of fire or electric shock, install this IAC-D in a temperature and humidity
controlled, indoor environment, free of conductive contaminants. Ambient temperature
must not exceed 40°C (104°F). Do not operate near water or excessive humidity (95% max).
The system is not intended for outdoor use.
Ensure all power is disconnected before performing installation or service.
Never dispose of batteries in a fire. Batteries may explode when exposed to flame.
Keep the IAC-D doors closed to ensure proper cooling airflow and to protect personnel
from dangerous voltages inside the unit.
Do not operate the UPS system close to gas or electric heat sources.
The operating environment should be maintained within the parameters stated in this
manual.
Keep surroundings uncluttered, clean, and free from excess moisture.
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of
the equipment.
SAVE THESE INSTRUCTIONS
UPS system
is a sophisticated power system and should be
D A N G E R
W A R N I N G
C A U T I O N
Introduction
1-5