Figure 2-1. Powerware 9390 Iac-D As Shipped On Pallet - Eaton Powerware 9390 IAC-D Installation And Operation Manual

EATON Powerware 9390 IAC-D Installation and Operation Manual S 164201591 Rev B powerware.com
®

Figure 2-1. Powerware 9390 IAC-D as Shipped on Pallet

Do not tilt the IAC-D more than 10° from vertical or the cabinet may tip over.
3. Set the pallet on a firm, level surface, allowing a minimum clearance of 3m (10 ft)
on each side for removing the cabinet from the pallet.
4. Remove the protective covering from the cabinet.
5. Remove the packing material, and discard or recycle in a responsible manner.
6. Inspect the contents for any evidence of physical damage, and compare each item
with the Bill of Lading. If damage has occurred or shortages are evident, contact
your Eaton service representative immediately to determine the extent of the
damage and its impact upon further installation.
While waiting for installation, protect the unpacked cabinet from moisture, dust,
NOTE
and other harmful contaminants. Failure to store and protect the IAC-D properly may
void your warranty.
IAC-D Installation Plan and Unpacking
C A U T I O N
2-3