Selector Switch; Reset -Circuit Breaker; Indicator Light "Add Mix; Indicator Light "Mix Out - ELECTRO FREEZE CS700-FG Operator's Manual

5 Operator Controls
5.2 Reset — Circuit Breaker (2)
This control protects the beater motor
against failure from an overload condition
by automatically shutting down the
freezer. To restart properly, turn the
SELECTOR switch to "OFF", wait 2-3
minutes, then depress the reset button
and turn the SELECTOR switch back to
the "AUTO" or "CLEAN" position.
5.3 Outlet Spindle (3)
This 220v receptacle provided in the
electrical box accepts the spindle cord.
5.4 Indicator- Light — "ADD MIX" (4)
This light indicates the mix in the mix
hopper is at a low level and should be
refilled as soon as possible. Always
maintain at least 2 inches (5.1 cm) of mix
in the hopper. For best operating results
keep hopper full.
5.5 Spindle Auxiliary Switch (5)
This push-button, when depressed, will
activate the spindle motor for additional
mixing of shake or during cleaning.
5.6 Mix Float (not shown)
When this float is mounted on the
float stem inside the mix hopper it
automatically senses the mix level. It
activates the "Add Mix" light.
185231-17
ELECTRO FREEZE Shake Model CS700-FG
— continued
If the circuit breaker trips frequently,
your freezer should be checked for
proper product temperature, overrun
and voltage. Contact your Electro
Freeze Distributor.
Important:
11