JLG X17JPLUS Operator, Safety, And General Maintenance Manual page 97

MUX17JP021602
Perform this operation only when really necessary. In all other situa‐
tions, travel with the machine closed and aligned.
Enabling of the JIB is indicated by the icon in position 5 on the remote control.
The JIB arm can be raised during travel only from the control position on the
ground.
Before raising the JIB boom for travel, check the following conditions:
• All the stabilisers must be lifted from the ground;
• No operators must be in the basket;
• The control position on the ground must be used (the remote control must not
be in place in the basket);
• The aerial part safety device bypass key must not have been activated after the
machine has been closed and aligned.
If one or more of these conditions is not satisfied, the JIB boom cannot be used and
one of the following error screens will be shown.
Fig. 86 Error machine not stabilized
Fig. 85 Consent to use JIB during travelling
Boom Lift Models X17JPLUS
USING THE MACHINE
95