INSTRUMENTS AND CONTROLS
MUX17JP021602
Fig. 40 Emergency stop pressed
Signals that one of the emergency stop buttons on the machine has not been rele‐
ased.
Fig. 41 Low battery level
Indicates that the battery charge level is below the minimum limit allowed. If this
message appears, it is advisable to recharge the battery, either by keeping the die‐
sel or petrol engine on, or by connecting to the network.
Fig. 42 Lithium error
Signals an error in the battery management system of Lithium version.
Fig. 43 CAN BUS error communication
The machine has a CANBUS line connection fault.
Fig. 44 Card fail
A faulty or incorrect electronic board (card) has been installed, or alternatively an
incorrect software version has been loaded.
56
Boom Lift Models X17JPLUS